Home E-mail Feedback
Customer utmost, quality first Principle:
Being down to earth and honest
Never best, always better
Brick plaster mesh

Beside the roofing mesh 3315 , now we factory also bought the expanded metal mesh machines to manufacture Brick Plaster Mesh. 

Brick Reinforcement Mesh is embedded in mortar (cement) joints to give extra tensile strength to wall and help withstand vibration and sudden loading, or to minimize unsightly cracks due to settlement.
1.Position the mesh flat within the brick bed joints.
2.Overlap by a minimum of 75mm if joining two lengths together. The mesh should be laid every third brickwork course for most reinforcement.
Brick mesh (stripmesh)
Material: galvanizing plate
Plate Thk: 0.3mm, 0.35mm, 0.45mm, 0.5mm, etc
Mesh Opening:16 X38MM
Width:65mm,100mm,150mm,200mm etc
Length: 1.2m, 1.22m
Packing: 500/box, 1000pcs/box, pallet.
* The mesh should be laid flat and set in the brickwork joint.  The reinforcement must be completely embedded in mortar.
* To be assured its effectiveness, it is normally laid on every third brickwork joint.
* Overlapping must be at least 75mm ( 3" ).


Copyright ©2005 Anping County Zhenyu Welded Wire Mesh Factory. All Rights Reserved.
Tel: +86-318-7060618 | Fax: +86-318-7669679 |  E-mail:sales@zhenyu-wiremesh.com | Site Map